| | Part No. 7036 |
| Material Safety Data Sheet |
| J.H. Young Company, Inc. | Preparation Date | 23-Apr-04 | ReviewDate | 23-Apr-04 |
| 8 Symington Place |
| Rochester, NY 14611-2409 |
| Phone: | Health Hazard | 1 - Slight |
| 1 (716) 235-7698 | Flammability Hazard | 0 - None |
| 1 (800) 724-7447 | Reactivity Hazard | 0 - None |
| Product Class | N/A | Trade Name | Stronghold 7036 Blanchard Wax |
| SECTION II - HAZARDOUS INGREDIENTS |
| Ethylene Glycol OSHA: C 50 PPM, ACGIH: C 50 PPM 29% |
| Phthalic Anhydride OSHA: 1 PPM, ACGIH: 1 PPM 71% |
| SECTION III - PHYSICAL DATA |
| Boiling Range | >212F/100C |
| Specific Gravity | 1.31 |
| Vapor Pressure | Nil |
| VaporDensity | >1.0 |
| Evaporation Rate | Nil |
| Percent Volatile by Volume | Nil |
| Solubility in Water | Nil |
| Appearance and Odor | Transparent solid. Resin odor when heated. |
| SECTION IV - FIRE AND EXPLOSION HAZARD |
| Flash Point | 505 degrees F (COC) |
| Extinguishing Media | Dry Chemical, Foam, Carbon Dioxide. |
| Special Fire Fighting Procedures | DO NOT USE WATER. |
| SECTION V - HEALTH HAZARD |
| Threshold Limit Value | None Established. |
| Effects of Overexposure | Unknown |
| Emergency and First Aid Procedures, Skin Contact | If heated to the melting point, this material may cause burns. Do not remove the material from 2nd or 3rd degree burns. SEE PHYSICIAN. |
| The information herein is given in good faith, but no warranty, express or implied, is made. |
| MSDS 7036 Prepared: 9/1/2000 2:25:46 PM Reviewed: 9/1/2000 2:25:46 PM Printed: 9/1/2000 2:28:44 PM | Page 1 of 2 |